PLEASE BE ADVISED 
Material: UV DTF Sticker (Ultraviolet Direct To Film Printing) 

Size: 1.26 X 4.37 Inches  

• These Pen/Bookmark Wraps are sized for certain pens and bookmarks so please be sure you know the size you need. Although these can be cut and deconstructed to fit your project. 
• These wraps can be applied to any smooth, flat surface except fabric.

If you are wanting to use these for bookmarks we do have some linked on my Amazon storefront. The storefront is linked on all of our social media platforms. You can find the link to those at the bottom of the screen from the home page.

How to apply:

1. Clean the surface of your product thoroughly. Apply only to smooth surfaces. You can use alcohol or soap and water just make sure it’s dry after.

2. Before you remove the backing place your wrap on a flat surface and use firm pressure to squeegee the whole design moving the squeegee back and forth several times. If you don’t have a squeegee yet you can use a card and/or apply pressure with your hands.

3. Carefully & slowly remove the sticker from its backing, especially if the design includes fine lines and small parts.

4. Apply the sticker to your product carefully, as once it's in place, it cannot be removed.

There are many techniques you can use to do this. I’d recommend watching a few videos online if it’s your first time.

5. Apply firm pressure to the already placed sticker by running the squeegee over the entire design area many times until there are no bubbles. This will ensure that your design will fully stick. This step is very important!

6. Once your design is applied fully, Slowly remove the clear top part of the sticker, especially around smaller parts of the design.

If any part of the design isn’t sticking, press it back down and use the squeegee again to apply pressure.

Disclaimer: We are not responsible for misuse or damage during the application process.