SensorTrack Capabilities and Features:

• Set the LCS SensorTrack™ to automatically perform one of eight pre-programmed actions every time an IR equipped locomotive passes over it.
• Pre-programmed actions include whistle and horn blows, CrewTalk™, and bell ringing
• Arrival and departure announcements vary according to the engine's direction of travel
• The LCS SensorTrack™ gathers all information directly from the locomotive without the need to use the orange module. This feature is especially useful when your layout hosts visiting locomotives (LEGACY Command Set required).
• Locomotive information and ID automatically load into all of your LEGACY™ CAB-2 remotes as they pass over the LCS SensorTrack

Create your own custom actions by recording commands made with your CAB remote or LCS App.

• Actions you record can include opening couplers, activating switch tracks, or any command made with the CAB remote or LCS App.
• Your custom action can include up to 250 time-stamped commands
• Your custom recordings can be activated by all IR engines passing over the LCS SensorTrack or
• limited to just the locomotive that was used to create the recording.
• Each LCS SensorTrack holds two custom recordings—one for each direction of travel for each IR-equipped locomotive.

NOTE: The LCS SensorTrack™ works only with IR equipped engines. All Legacy locos made after November 2011 and ALL Vision locos are IR equipped. For a complete list of IR equipped locomotives, check out our website at Lionel.com/LCS . A LEGACY™ CAB 1L or CAB 2 is required.