Built for tradies: The Embraco Aspera NEU2168GK is a low-temperature LBP hermetic compressor sized for display freezers, reach-ins and merchandisers. It helps licensed techs finish installs faster with clean starts and solid pull-down, no dramas.

Heads-up on refrigerant: most NEU2168GK engineering codes are set up for R404A LBP. If you’re running R134a low temp, confirm the nameplate/engineering code or contact us for the correct variant. Fair dinkum, matching the code saves call-backs.

Key Features & Trade Benefits

• LBP low-temperature application — ideal for freezers and merchandisers; dependable case temps and fewer nuisance call-backs.
• CSIR motor with High Start Torque — clean hot starts on tight systems; less breaker tripping and downtime.
• 14.28 cm³ displacement — proven duty range for common single-cabinet freezers.
• Factory oil charge: POE ISO 22 (~350 ml) — ready for evacuation and weighed charge; suited to modern refrigerants.
• Stubs sized for quick brazing — suction Ø 8.1 mm (slanted 42°); discharge/process Ø 6.1 mm; neat, repeatable joints.
• Compact UNI base, 206 mm height, ~11.6 kg — easy handling in tight merchandiser cavities; faster swap-outs.
• Capacitor spec you can trust — typical start capacitor 88–108 µF / 330 V with current relay; stick to the datasheet and you’ll be right.

Why This Compressor Matters

Quick yarn: Perth summer arvo, corner-store merchandiser icing up and drifting warm by lunch. We slotted in a NEU2168GK, fitted a fresh drier, nitrogen-tested, pulled <500 microns and weighed in to spec. Cabinet was back at setpoint before smoko. That’s the difference when the duty and engineering code match — too easy.

Need matching tooling and spares? Our Refrigeration collection keeps the whole system humming.

Pro Tip

Always replace the liquid-line drier and purge with nitrogen while brazing. Log your vacuum with a micron gauge, isolate for a decay test, then weigh the charge. It’s a small step that chops down call-backs. She’ll be right.

Compatibility & System Info

• Refrigerant: Typically R404A LBP for engineering code 959MA51; some variants/alternatives approved in Embraco literature. Verify your nameplate if you intend to run R134a low temp.
• Systems: Capillary tube or TXV; display freezers, reach-ins, merchandisers.
• Electrical: 220–240 V, 50 Hz, single-phase; CSIR (HST). Typical start capacitor 88–108 µF / 330 V with current relay.
• Local note: Sydney humidity and Brisbane heat push head pressure — clean the condenser and confirm fan direction after the swap.

What’s Included

• Embraco NEU2168GK hermetic compressor (POE ISO 22 oil, ~350 ml)
• Overload and current relay per kit
• Mounting grommets (typical set), terminal cover
• Note: Start capacitors and some hardware may be supplied separately — check the box contents on delivery.

Specifications

Key specs verified against Embraco/partner datasheets and distributors. Always confirm the exact engineering code for your refrigerant and duty.

Warranty & Returns

Backed by manufacturer warranty. HVAC Shop supports returns per our Shipping & Returns policy. Australian consumer guarantees apply.

FAQs

Related Products

• Bradley NR1000 High-Pressure Nitrogen Regulator — makes pressure testing and purging simple and consistent.
• Vacuum Pumps (collection) — hit and hold target microns for dry, clean systems.
• Refrigerant Gauges (collection) — charge accurately and cut call-backs.
• Hilmor Nitrogen Purge Tool — cleaner joints; no oxide headaches.

For Australian safety and handling guidance, see AIRAH’s Refrigerant Handling Codes of Practice.