This electric winch has been tested vigorously, the GP100 won its first competitive outing and has been dominating the off-road world (worldwide) ever-since, winning such events as the Croatia Trophy, Breslau Rallye, Graf Trophy, Portugal Extrem, Thailand Extreme, the Ultra4 European Championship, to name a few. With off-load line speeds from 24m up to 182m per minute, there is a GP100 for everyone!

GIGGLEPIN Winches are proud to announce their NEW 2-SPEED family!
2-SPEED Winches, 2-SPEED Top Housings and 2-SPEED Gear Sets.

The GIGGLEPIN  2-SPEED Gear family offer unrivalled versatility, letting you seamlessly change between low and high gears at the flick of a switch. This innovation marks a first for GIGGLEPIN , combining our renowned reliability and build quality with 2-speed functionality in one unit. Designed for those who demand precision and speed, this cutting-edge 2-SPEED is perfect for any challenge.

With over three years of testing in the field and on test rigs, these 2-SPEED units have already proven themselves by winning events in Europe and withstanding imposed loads of over 13 tons during tests.

The NEW 2-SPEED gives you Power, Speed and Control.
Power: Use low gear to give you unrivalled strength and Power
Speed: Switch to high gear and unleash the Speed for fast recoveries and line retrieval.
Control: Two ratios allow you to have Control over all your recovery situations allowing you to be safer and more efficient

What is the NEW 2-SPEED family?

The NEW 2-SPEED family is available as three different options. You can choose from:

• 2-SPEED Winches - Factory built GP100, GP50 and GP25 Winches with the NEW 2-SPEED gears installed and ready for action
• 2-SPEED Gear Sets - these gear sets can be retro fitted to upgrade your existing GP100, GP50 and GP25; or any winch fitted with a GIGGLEPIN top housing manufactured after 2017
• 2-SPEED Top Housings - these are available in Twin-Motor and Single-Motor configurations to fit all existing models and older GIGGLEPIN GP80, WARN 8274 and 8074 winches

What makes the NEW 2-SPEED so good?

The NEW 2-SPEED family from GIGGLEPIN Winches raises the bar for performance winching and has the following key features:

• Multiple gear choices in low and high ratios
• Timed gearing for silky smooth operation
• Easy to fit to existing winches
• Heat treated gears and engagement dogs for unparalleled strength
• Air activation that defaults to the low ratio if air is lost
• Externally mounted air system means no possibility of air leaks inside the winch
• Stainless steel external hardware for corrosion resistance
• 7 engagement dogs for maximum strength
• Neutral gear positioning allowing gear changes while at speed
• Proven to handle over 13 tons of loading during testing
• GIGGLEPIN reliability and build quality with worldwide support

What ratios are available?

Low ratio options:

+ 00% (133.28:1)                       

+ 15% (115.41:1)                        

+ 25% (100.94:1)                        

+ 40% (83.75:1)                          

High Ratio options:

+ 15% (115.41:1)                        

+ 25% (100.94:1)                        

+ 40% (83.75:1)                          

+ 50% (66.56:1)                          

+ 60% (53.68:1)   

Need even more speed? Pair with Hellfire or Hurricane Gears! Note: Hell–Fire gear ratios have been updated to work with the NEW 2-SPEED Gears.

Can be fitted with Hurricane and/or Hellfire Gears at time of order at no extra cost - see chart below.

What else do I need to operate 2-SPEED systems?

The New 2-SPEED family require a regulated air feed to make them operate. You will need an air supply with a minimum air pressure of 80psi and a maximum pressure of 150psi to operate the system. We recommend using ARB mini, high-output and twin motor compressors.

It also has the following amazing features-

• Super smooth air operated FreeSpool drum,
• Stronger, lightweight, cast aluminium housings,
• High performance EN36 heat treated gears,
• Three drum sizes - Short 10” (254mm), Standard 13” (+76mm), Long 14.5” (+114mm),
• 11 Roller bearings for silky smooth operation,
• Removable stainless steel Brake Pawl mount,
• Fully submersible,
• Supplied with Bow Motor 2 (12V or 24V),
• GIGGLEPIN Solenoids, PowerBars and Wiring (Pro 100 as standard, Pro 150 as optional extra)
• 18 symmetrical M12 mounting points,
• Super strong polished stainless steel Fairlead,
• External ratchet brake,
• Billet drum end plate with rear BraceBars,
• Oil Filled gearbox for perfect lubrication,
• Large drain and filler plugs,
• Serial numbered for traceability,
• Can be supplied with GIGGLEPIN MBS system,
• Designed and built in UK.

THE BEST WINCH YOU WILL EVER OWN!

3 Year Mechanical Warranty (Motors and Solenoids not included)

* Can be supplied with Hellfire Gears to give more ratio options at no extra cost!

3 Year Warranty on mechanical parts (motors and solenoids not included)

Dimensions sheets for all three drum sizes available to download here -
Standard Drum (76mm Longer than WARN 8274)
Short Drum (Same as WARN 8274)
Long Drum (114mm Longer than WARN 8274)

Winch Weights & Shipping Weights -

The Hurricane Gear set offers the following speed increases:

Standard ratios                              Fitted with Hurricane gears

+ 00%    133.28:1                            Becomes +31%   91.82:1

+ 15%    115.41:1                             Becomes +40%   79.50:1

+ 25%    100.94:1                            Becomes +48%   69.53:1

+ 40%      83.75:1                             Becomes +57%   57.69:1

+ 50%      66.56:1                             Becomes +66%   45.86:1

+ 60%      53.68:1                             Becomes +72%   36.98:1

The NEW Hellfire gears are made from our usual heat treated EN36 steel, and offer the following speed increases when using a standard GP mainshaft:

Standard GP100 ratios         Fitted with Hellfire gears
+ 00% 133.28:1                     Becomes +55% 59.39:1
+ 15% 115.41:1                     Becomes +61% 51.43:1
+ 25% 100.94:1                     Becomes +66% 44.98:1
+ 40% 83.75:1                       Becomes +72% 37.32:1
+ 50% 66.56:1                       Becomes +78% 29.66:1
+ 60% 53.68:1                       Becomes +82% 23.92:1

The NEW Hellfire gears offer the following speed increases when combined with the Hurricane gears:

Standard GP100 ratios                Fitted with Hurricane and Hellfire gears

+ 00% 133.28:1                         Becomes +69% 40.92:1
+ 15% 115.41:1                         Becomes +73% 35.43:1
+ 25% 100.94:1                         Becomes +77% 30.99:1
+ 40% 83.75:1                           Becomes +81% 25.71:1
+ 50% 66.56:1                           Becomes +85% 20.43:1
+ 60% 53.68:1                           Becomes +88% 16.48:1

24V System available upon request.
If you are unsure of your winching requirements, or have any questions or queries, please get in touch.