Who it’s for: licensed fridgies, service techs, and apprentices who need accurate, stable temperature data on Dixell XR-series controllers. Plug it in, route the 3.0m lead, and you’re back on the tools, no worries.

Key Features & Trade Benefits

• 3.0m over-moulded cable (thermoplastic, IP68) — reach deep into cases, ducts, or coolrooms without splicing; durable and bloody good against moisture.
• 10k NTC thermistor (EU-NTC curve) — the correct resistance curve for most Dixell XR controllers, delivering precise control and fewer call-backs.
• -40 to +110 °C operating range — suitable for freezers through to warm ambient sensing on service calls.
• Pre-wired 2-wire lead — true plug-and-play replacement to save site time.
• Compact probe head (≈ Ø5 × 20 mm) — easy to mount on coils, pipework or inside cabinets without fouling airflow.

Why This Probe Matters

When a sensor drifts, setpoints wander and product temps creep—energy bills climb and customers ring back. Swap in the NG6P-3.0 and restore confidence in your readings. Quick story: a Brisbane bottle-shop coolroom kept short-cycling after defrost. Tech swapped the suspect probe for an NG6P during a lunch rush—temps stabilised within the hour and fair dinkum, no more complaints that week.

Need to compare other probe lengths? See our NTC probe category for 1.5 m and 10 m options.

Pro Tip

• Set the correct probe type: On Dixell XR controllers, ensure the input is configured for EU-NTC 10k to avoid offset errors.
• Placement: Avoid direct frost/defrost spray and dead-air corners; secure to the coil or in representative airflow. Use a dab of thermal paste and insulate if you’re sensing pipe temperature.
• Ingress protection: It’s IP68, but always route the cable with a drip loop and avoid pinch points at door gaskets.

Compatibility & System Info

Works with popular Dixell XR-series controllers that specify a 10k NTC probe, including XR20CX and XR60CX (check your controller manual). Probe is refrigerant-agnostic — suitable anywhere the controller expects 10k NTC (R32, R410A, R134a, CO₂ systems, etc.).

Working around Sydney’s coastal humidity or hot back-of-house spaces in Brisbane? Route and secure the lead away from heaters, door hinges, and fan blades for clean, fast response.

What’s Included

• 1 × Dixell NTC temperature probe
• Model: NG6P-3.0
• Cable length: 3.0 metres
• Ready-to-install 2-wire configuration

Specifications

Warranty & Returns

Backed by the manufacturer’s warranty. For shipping times, return windows and restocking terms, see our Shipping & Returns policy. Keep packaging until fit-up is confirmed on site.

FAQs

Will this work with my Dixell XR20CX?
Yes — the NG6P-3.0 is designed for XR-series inputs expecting a 10k NTC (EU-NTC) probe.

Is it suitable for freezer rooms?
Yes — the -40 °C lower limit makes it ideal for freezers, walk-ins, and refrigerated cabinets.

What if my controller uses a different curve?
Some controllers can be switched between probe types. If yours expects US-NTC or Pt1000, select the matching probe and setting to avoid errors.

Related Products

• Dixell XR20CX-B Digital Controller — a reliable medium-temp controller that pairs perfectly with this probe for fast, stable control.
• Dixell NG6P-10 (10 m) — same spec, extra length for larger rooms or long cable runs.
• Understanding Refrigerant Gauges (Blog) — good refresher on measurement basics while you’re tuning systems.

Compliance & Good Practice

For professional guidance and industry best practice, see AIRAH.