Protect and prevent damage to your motor's skeg with the Megaware SkegGuard. The SkegGuard can also be used to repair and replace an already broken skeg with as little as 2-3 inches of skeg remaining. Available for many inboard/outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo and Yamaha motors.

THE INEXPENSIVE SOLUTION TO A BROKEN OR DAMAGED SKEG

MEGAWARE SKEGGUARD ENGINEERING

Constructed of high quality 18 gauge marine grade 316 stainless steel

Mirror Polished Finish

Reinforced 3mm lower wear tab protects against ramp dragging or damage from hidden debris

Conforms to your lower unit to ensure there is no discernible drag or compromise in performance

Drain hole on the bottom to prevent water from collecting and becoming stagnant and causing corrosion

Installs with as little as 2-3 inches of Skeg remaining

Do-it-yourself in less that 10 minutes

Comes with stainless steel self locking hardware and hex wrenches

Available for many inboard/outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo and Yamaha motors

Constructed of High Quality Marine Grade 316 Stainless Steel with a Mirror Polished Finish

Mirror Polished Finish for Long Lasting Shine

Constructed of high quality 18 gauge marine grade 316 stainless steel

Mirror Polished Finish

Installs with as little as 2-3 inches of Skeg remaining

Reinforced Wear Tab and Drainage Hole

Drain hole on the bottom to prevent water from collecting and becoming stagnant and causing corrosion

Thickened 3mm lower wear tab protects against ramp dragging or damage from hidden debris

Conforms to your lower unit to ensure there is no discernible drag or compromise in performance

Many Models Available for Virtually Any Skeg

Do-it-yourself in less that 10 minutes

Comes with stainless steel self locking hardware and hex wrenches

Available for many inboard outboard motors

EASY DO-IT-YOURSELF INSTALLATION IN 4 BASIC STEPS

1) Ensure proper fit

Prior to installing the Megaware SkegGuard visually make sure the model fits well with the skeg on your motor.

2) Skeg Preparation

Any spurs or jagged edges should be filed smooth so the SkegGuard can slide easily over the existing skeg.

3) Install SkegGuard

Using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it to get it started. Then drive it on with the mallet until it's fully seated.

4) Install Stainless Steel Hardware

Using the pre-drilled mounting holes on the SkegGuard as pilot holes, drill the skeg using a 1/4" drill bit.

Install the stainless steel hardware using the hex key supplied.

Avoid Expensive Repair Costs and Protect and Prevent Damage to Your Motor's Skeg

IMPORTANT!

When workin with this product, ALWAYS WEAR GLOVES to prevent injury to yourself and others. This product can and will cut your skin if not handled properly

The Megaware SkegGuard is NOT designed to prevent damage in the event of a collision impact with stationary objects. This product is designed to prevent and reduce wear and the amount of damage encountered while hitting minor floating objects or submerged stumps or rocks.

⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀

PROTECT YOUR WATERCRAFT WITH PREMIER PRODUCTS FROM MEGAWARE

A Commitment to Excellence in Product Development and Quality Standards

Megaware KeelGuard developed the industry’s first patented, do-it-yourself keel protector in 1992. As a family owned and operated business, Megaware continues to lead the industry in engineering, design and quality with their premier line of products - Keel Guard, Pontoon Guard, Skeg Guard, Skeg Pro, Scuff Buster, FlexStep Pro and BatteryGuard.

‎Through commitment to excellence in product development, quality standards, technology and customer support, Megaware KeelGuard has grown rapidly and is recognized as a worldwide supplier for the smallest fishing boats to the largest coast guard fleets.

As new technologies emerge, Megaware will incorporate these advancements to further enhance its line of cutting edge, easy-to-use products. Don’t trust your investment to anything less.

‏‏‎ ‎

• Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware
• Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
• Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
• Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
• The Perfect Boat Accessory – This SkegGuard fits: SUZUKI : 150-175-200-225HP 2 & 4 Stroke 1986-Present / 250 HP 4 Stroke 2004-Present (No AP/SS Models). Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha