MuxLab 500766 HDMI 4K/60 KVM Over IP Transceiver 10Gb for Networked AV Systems

The MuxLab HDMI 4K/60 KVM over IP Transceiver enables HDMI video, USB KVM, and control signals to be extended over standard IP networks for professional AV and IT environments. Designed for scalable video wall, matrix switching, and virtual splitter configurations, it supports user configurable size (X by Y) layouts. This solution is ideal for commercial AV, control rooms, and collaborative PC systems.

Supporting HDMI up to 4K at 60Hz, the transceiver delivers uncompressed or lightly compressed video depending on chroma format, with zero latency for 4K60 (4:2:0) and less than one frame latency for 4K60 (4:4:4). It operates over a 10 Gig Ethernet network and supports both copper UTP and fiber transport options. USB ports enable KVM applications, while RS232 and bi-directional IR provide remote device control.

Built for reliability and centralized management, the system supports audio embedded and de-embedded operation and integrates with MuxControl for configuration and monitoring. It includes power supply, IR sensor, IR emitter, and a wall mount bracket for secure installation. This transceiver is well suited for demanding AV over IP deployments requiring high performance and flexibility.

Key Features

• 4K Ultra HD Support: Supports HDMI up to 4K/60.
• Low Latency Performance: Uncompressed up to 4K60 (4:2:0) and light compression up to 4K60 (4:4:4).
• Networked AV Architecture: Supports video wall, virtual switch, and splitter configurations.
• KVM Integration: USB ports support KVM applications.
• Control Capabilities: Supports RS232 and IR transmission for remote control.
• Variant Options: Available in 10Gb UTP and 10Gb Fiber models.

Technical Specifications

Environment
HDMI 2.0

Devices
Blu-Ray players, projectors, monitors, TVs, PC, laptops, and media servers supporting HDMI.

Bandwidth
594MHz

Signals
HDMI 2.0 and HDCP 2.2

Connectors
(2) HDMI receptacles for source or display devices.
(2) RJ45s for Cat5e unshielded or shielded twisted pair (for 10GbE and 1GbE ports).
(2) 3.5mm jacks for IR emitter and IR sensor.
(2) 3.5mm jacks for Analog Audio Input and Output.
(1) Terminal Block connector for RS232.
(1) USB 1.1 Type A connector for Host or Device equipment.
(1) SFP cage for SFP+ (10G module not included).
(1) 2.1mm power jack for DC power.
Note: Cables not included.

Maximum Distance
UTP: Cat5e/6: 330ft (100m) up to 4K @ 60Hz
Fiber: OM3 Multimode fiber: 985ft (300m) up to 4K @ 60Hz

Latency
No Compression Zero Latency up to 4K60 (4:2:0), and less than one Frame (16ms) @ 4K60 (4:4:4)

Compression
Uncompressed up to 4K60 (4:2:0), and light compression for 4K60 (4:4:4) only

Network Bandwidth
10 Gbps

Network Requirement
10Gig Network XFI, IEEE 802.3

IR Frequency
38 to 56KHz

RJ45 Pin Configuration
RJ45 Link
Pin 1 (R)
Pin 2 (T)
Pin 3 (R)
Pin 6 (T)
Pin 4 (R)
Pin 5 (T)
Pin 7 (R)
Pin 8 (T)
Reverse Polarity Sensitive. Use EIA/TIA 568A or 568B straight-through wiring.

Cable
UTP: (1) Cat 5e/6 or better twisted pair cables required
Fiber: (1) Dual LC OM3 or OM4 Multimode fiber cable required

Power Source
Input: 100-240V @ 50-60Hz
Output: 5VDC @ 3A
Interchangeable blade PSU with US, UK, Euro and AUS

Power Consumption
11 Watts

Temperature
Operating: 0° to 40°C
Storage: -20° to 85°C
Humidity: Up to 95 percent non-condensing

Dimensions
8.2" x 5.1" x 0.9" (210mm x 132mm x 24mm)

Weight
1.36lbs (0.62kg)

Compliance
Regulatory: FCC, CE, RoHS
Flammability: 94V0

Warranty
3 years

What's in the Box
(1) Model shipped depends on variant selection: 500766 UTP or 500766-Fiber