Kegerator X Plus with two single tap towers and fittings ready to attach to commercial A type kegs.

Full two-year warranty.

The Base Unit includes

• Series X Plus Main Body
• MK4 KegLand Regulator with a 8 mm duotight fitting.
• 2 x Black Plastic Wrap Around Drip Trays
• 6 x Castor Wheels (3 Locking and 3 Free Spinning)
• CO2 Cylinder Holder (designed to suit 2.6kg gas cylinder)
• Chrome Plated Guard Rail

Please note it does not come with a wire shelf.

What Fits Inside?

• 2 x 50lt Commerical Kegs
• 6 x 20lt Commerical Kegs
• 8 x 19lt Ball-Lock Cornelius Kegs

This package includes two complete single beer tap towers with hose and fittings, ready to use. Fitted with a stainless steel shank & Nukatap that is spring loaded (closes when released) attached to three meters of keg line.

The tower is 35 cm high, 7.8 cm diameter.

Includes two A type couplers to attached directly to A type commercial kegs.

The Series X Plus has been designed with these major objectives

• Energy efficiency
• Quiet operation
• Ergonomic design
• Maximum keg storage in compact footprint

Series X Plus Dimensions

• 900 mm Wide
• 708 mm Deep
• 840 mm (Excluding castor wheels and guard rail)

Minimum clearance around the Series X Plus Kegerator

The Series X plus kegerator has radiators in the left- and right-hand walls of the kegerator. These radiators need to be well ventilated so that heat can be dissipated from within the kegerator to the external environment.

A minimum of 100 mm clearance is required on the left- and right-hand side and the back of the kegerator. Failure to leave this clearance may void the warranty as it is essential for proper cooling and can cause high electrical consumption and may cause the kegerator to fail prematurely.

Normal Kegerator Operating Sounds

KegLand Kegerators have been manufactured with the new r600a refrigerant gas used on many appliances. It is used because it is the most environmentally friendly gas and it is also extremely energy efficient. The new r600a gas does make some unusual sounds (all units with r600a gas make similar sounds).

If you want to know how loud this unit is before ordering, download a sound meter app for your smartphone or get an inexpensive decibel meter. Reference the figures below which give the noise level when the compressor is on and put your decibel meter by your computer speaker and turn up the speaker until the meter reads 44 to 62 db. This will give you a good idea of the sound a kegerator makes when running. Keep in mind, that like a refrigerator, it only makes noise when it is cooling, so it is silent a lot of the time.

Outside the rear of the unit from the Compressor (ranges from 50 to 62 db with a sound meter).

Outside the back of the unit one foot from the Compressor (ranges from 52 to 65 db with a sound meter).