FBT VHA 112 SA 12-Inch Vertical/Horizontal Active Line Array Subwoofer

Vertical Horizontal Array Active Subwoofer - 1200w RMS - 135dB SPL

Constructed in birch plywood with a tough and tour-ready synthetic rubber surround, each VHA406A comprises four 6.5-inch woofers plus a 1.4 large-format neodymium compression driver with a 2.5 voice coil. The purpose-designed central waveguide, optimized with BEM finite element simulations, offers dispersion of 90° horizontal and 20° vertical, with precise and focused vertical control across the enclosures entire operating range. The result is a combination of perfectly balanced, symmetrical dispersion multiple system can be coupled with full coherence far beyond 18KHz, plus a particularly powerful, defined midrange with a frequency response extending from 65Hz to 20KHz.

The VHA406As Class-D, switch mode amplifier module is constructed in die-cast aluminum with natural convection to deliver 600W for the LF section and 300W for the HF. Courtesy of an integrated DSP processor with next generation algorithms, users can choose from eight presets to further tailor system performance whilst enjoying the systems tremendous headroom to ensure the best possible audio fidelity.

Integrated hardware allows the linking of up to six VHA406A cabinets with variable angles from 5° to 20° (in 5° steps), ensuring an easy and error-proof system configuration and set-up. Rigging is simplified even further by the inclusion of only one setting point per side. All setting pins are fixed and integrated into the hardware, eliminating both the risk of loss and damage in transport.

Crucially, the HORIZON VHA system also boasts integrated quick-release anchor points that facilitate the creation of horizontal arrays using the dedicated flybar. Each flybar will support up to three VHA406A cabinets, while multiple flybars can be joined for the creation of arrays delivering up to 360° coverage.

Key Features

• Bass-reflex amplified subwoofer
• 320 High-excursion 320mm (12”) Woofer B&C
• Frequency response from 45Hz to 120Hz
• 1200Wrms class D amplifier with switching mode power supply
• DSP processor with 8 presets, delay
• Control panel with XLR input and link, volume, presets, delay, ground-lift
• Neutrik PowerCON TRUE1 IN and LINK power connectors
• Cabinet in 12mm (0.5”) birch plywood with anti-scratch varnish. Handles with rubber inserts and rubber-coated sides to protect the cabinet from bumps and scratches.
• Ideal for reinforcing and extending the low range of the VHA406A line array in the 45Hz - 120Hz range

Technical Specifications

Configuration
Bass Reflex
Frequency response
45Hz - 120Hz -6dB
Low frequency woofer
12” (3” VC)
Maximum SPL cont/peak
131.5/135 half-space dB
Dispersion
Omnidirectional
Input impedance
22kOhm
Crossover frequency
Preset Dependent
Input connector
XLR with link out
Net Dimension (WxHxD)
612 x 360 x 397 mm
Net Weight
25kg
Transport Dimension (WxHxD)
695 x 440 x 475mm
Transport Weight
28kg
AC Power requirements
640VA
Built-in amplifier LF/HF
1200w
Built-in amplifier peak LF/HF
2400w
Power cord
5m