Denne pakken inneholder alt du trenger for å komme igang med e-tekstiler. 

• Alt du trenger for å gjennomføre tre prosjekter
• Nok Electro-Fashion komponenter for å komme igang med e-tekstiler
• Komplett veiledning
• Prosjektideer

Pakken inneholder

• 2 x Sewable Blue LEDs.
• 2 x Sewable White LEDs.
• 2 x Sewable Sakura (lilac) LEDs.
• 2 x Blue Flashing LEDs.
• 2 x Green Flashing LEDs.
• 2 x White Flashing LEDs.
• 1 x Slide Switch.
• 1 x Push Switch.
• 2 x CR2032 Coin Cell Batteries.
• 1 x CR1220 Coin Cell Battery.
• 1 x 6m Conductive Thread.
• 1 x Coin Cell Holder.
• 1 x Miniature Coin Cell Holder.
• 1 x Switched Coin Cell Holder.

Dimensjoner

• Ultra Slim Sewable LED Length: 15mm.
• Ultra Slim Sewable LED Width: 6.5mm.
• Ultra Slim Sewable LED Height: 2.7mm.
• Slide Switch Length: 18mm.
• Slide Switch Width: 8.5mm.
• Slide Button Switch Height: 4mm.
• Push Button Switch Length: 18mm.
• Push Button Switch Width: 8.5mm.
• Push Button Switch Height: 3mm.
• CR1220 Battery Height: 2mm.
• CR1220 Battery Diameter: 12mm.
• CR2032 Battery Height: 3.2mm.
• CR2032 Battery Diameter: 20mm.
• Sewable Coin Cell Holder Length: 34mm.
• Sewable Coin Cell Holder Width: 20mm.
• Sewable Coin Cell Holder Height: 4.5mm.
• Sewable Miniature Coin Cell Holder Length: 22mm.
• Sewable Miniature Coin Cell Holder Width: 12.5mm.
• Sewable Miniature Coin Cell Holder Height: 4mm.
• Switched Coin Cell Holder Length: 22mm.
• Switched Coin Cell Holder Width: 12.5mm.
• Switched Coin Cell Holder Height: 4mm.

Du trenger

• Saks
• Tang
• Nåler

Ressurser

• Brukerveiledning (på engelsk)

MERK: Batteriholderen i denne pakken inneholder nikkel og bør ikke brukes i design som vil være i langvarig kontakt med huden.